Select Create installation media (USB flash drive, DVD or ISO file) for another PC
Use the recommended options
Select USB flash drive (min 8 GB)
Select your USB flash drive (this will remove all its data)
Hold SHIFT and click Restart
Select Use a device and select your Flash Drive
Select Windows 10 Pro
Select I don't have a product key
Select Custom: Install Windows only (advanced)
Press SHIFT + F10
Type diskpart into the CMD
Type select disk # (for every disk number) and clean for every disk you have except your Flash Drive (Your Flash Drive is likely the last drive listed)
Close the CMD and click Refresh
Select your main drive and click Next
Continue with the setup and finish installing Windows
DO NOT login to Microsoft
Disable any and all antivirus that is running on your computer, even in the background, you can use the "Control Defender" tool to permanently disable your Windows antivirus (PASSWORD : sordum)
Flash your bios using a version higher than your current one or a lower one, remember to check compatibility and never flash it with the same current version.
Tutorial
Download your BIOS file from the manufacturer's site (a newer or older version than your current one)
Go into your BIOS
Flash
Here are some video tutorials for flashing the bios:
DISABLE Secure Boot and restore/install all secure boot keys
Disable CSM (Compatibility Support Module)
Disable SVM (CPU Virtualization) in your BIOS
Disable PTT (Intel Platform Trust Technology) / TPM
Disable Trusted Computing / Intel Trust
Disable Secure Boot and restore/install all secure boot keys
Disable VT-x / VT-d (CPU Virtualization) in your BIOS
Disable CSM (Compatibility Support Module)
After that, save the changes and exit your BIOS
Then check that the changes have been made successfully:
In windows, Press WinKey + R and type msinfo32 and press Enter. Check if the value for Secure Boot State is OFF
Press WinKey + R and type tpm.msc and press Enter. It should say no compatible tpm is found
If it's as expected, we can continue with the tutorial
Spoofing PC
Saving your old HWID
After you receive the spoofer loader, open it and create an account or log in if you already have one. Once you're logged into the loader, save your hwid, which will be displayed on the left side of the loader.
Spoofing
After saving your hwid, close all applications on your computer and start the spoofing process. Once you start the process, your mouse and keyboard will "freeze". After that, your internet connection will stop working momentarily and then resume as normal, along with your mouse and keyboard.
When the spoofing process is complete, restart your computer and check in the loader if your hwid has changed. If it hasn't changed, enable "UEFI Spoof" and try again.
To bypass TPM 2.0 / HVCI / SB, access our other tab called VAN RESTRICTION
To bypass TPM 2.0, access our other tab called TPM BYPASS
Additional Spoofing
If you are still getting banned even after following all the methods listed above, or if you want more security when spoofing to completely avoid a ban, follow the methods listed below
Spoofing your GPU (Optional)
For spoof your GPU we will use the DDU application to do this.
If the application asks to configure, just click "Close" and do not change the settings. After that, select your graphics card in the top right under "Select Device Type" and click "GPU". The application will automatically detect your graphics card, so you don't need to define it. After that, click "Clean and Restart" and wait for the application to clean everything and restart your computer. Once your computer restarts, download the drivers for your graphics card and install them.
Spoofing your Monitor (Optional)
For spoof your monitor we will use the CRU application for that.
Follow the steps in the video below to spoof your monitor (Remember to always change all the present serials).
Some anticheats may ban your router's MAC address and various other aspects of your internet connection. It is recommended to use a VPN while playing, but remember, this is not mandatory.
